How about learning about the slurry purification marvel: a fully automatic wet high-intensity magnetic separator?

Hello everyone! We are a professional manufacturer of magnetic separation equipment. Recently, many friends in the ceramics, kaolin, and alumina industries have asked us: how can we effectively remove iron powder from slurries? Especially those fine ferromagnetic substances, which are simply impossible to handle with ordinary equipment and are extremely labor-intensive.
Today, we'd like to introduce our "star model"—the Fully Automatic Wet High Intensity Magnetic Separator. This machine is specifically designed for removing iron from "picky" slurries, especially in industries like ceramics, alumina, and kaolin where high purity is required. It's definitely your best helper!

 ​​
What "difficult cases" does the Fully Automatic Wet Magnetic Separator handle?
Simply put, if your slurry temperature is below 60℃ and contains iron powder, micro-iron powder, or other magnetic impurities ranging from 10 mesh to 1500 mesh, the Fully Automatic Wet High Intensity Magnetic Separator is the right choice.
Whether you're in the high-end ceramics, high-voltage electrical porcelain, fine chemical, or food industries, if you want to remove ferromagnetic substances from slurries and glazes, this machine can handle it. Its greatest strengths are: clean selection, fully automatic operation, and ease of use.
Three core features that will explain its excellence:
1. Rapid heat dissipation, low temperature rise, and stable operation around the clock
What's the biggest fear for electromagnetic separators? Overheating! Overheating disrupts the magnetic field, significantly reducing the iron removal effect.
The fully automatic wet high-intensity magnetic separator uses 25# transformer oil as the insulating oil for the electromagnetic windings, and features forced circulation cooling. What does this mean? It means it's equipped with a highly efficient "cooling system," ensuring the oil temperature rise does not exceed 60℃. This allows the equipment to operate stably for extended periods without overheating, maintaining consistent iron removal performance.

 
2. Powerful magnetic medium, high magnetic field gradient, and more thorough iron removal
The effectiveness of iron removal depends heavily on the magnetic medium. We use a stainless high-permeability magnetic material, whose magnetic properties are 15% higher than the excitation magnetic field strength!
What does this mean? Lower energy consumption, higher magnetic field gradient, more uniform magnetic field distribution, and a longer effective magnetic separation zone. Those fine iron powders, once flowing through this area, have virtually nowhere to escape; they are all captured. Many customers have reported that after using the Fully Automatic Wet High Intensity Magnetic Separator, product whiteness has increased, impurity content has decreased, and quality has visibly improved.
3. Fully Automatic Operation, Unattended, Completely Freeing Up Your Hands
This is the point that our long-term customers rave about! Previously, iron removal equipment required manual operation during iron unloading, which was dirty, tiring, and prone to wasting slurry.
The Fully Automatic Wet High Intensity Magnetic Separator achieves a fully automated process for feeding, discharging, and unloading iron. We use advanced computer programming control; the system is stable and reliable, and the operation panel allows for arbitrary parameter settings—adjustments are possible as needed.
The valves use reliable solenoid valves, precisely controlled through programming for fully automatic operation.
When unloading iron, the equipment has a built-in clean water tank. Through programming, the water usage is precisely controlled, using minimal water to thoroughly wash away the iron, leaving no residual iron powder and no slurry loss.
Throughout the entire process, you only need to supervise and go about your business. The saved time and labor costs translate directly into increased profits.

 ​​​​​​​
In summary, if you are troubled by iron powder in your slurry and want:

• More thorough iron removal, improving product quality;
• Easier operation, no need to constantly monitor the machine;
• More water-efficient, reducing production costs;

Then this DCX fully automatic wet magnetic separator is definitely worth considering.
It is particularly suitable for industries with extremely high requirements for raw material purity, such as high-grade ceramics, high-voltage electrical porcelain, alumina, and kaolin. Everyone understands that only by removing iron cleanly can products fetch a good price.
Want to learn more details? Or want to conduct a test with your slurry? Feel free to contact us! We can provide the most suitable Fully Automatic Wet Magnetic Separator selection solution based on your specific working conditions